Things about Deck Staining Murfreesboro

Wiki Article

The Only Guide to Deck Staining Murfreesboro

This is also the case if you want to put a water based deck stain over an oil based deck stain. These products were never designed to work on top of each other. Water based products won’t stick to an oil based coating. By trying to cut corners, you’ll end up with a deck that looks ugly and will peel and fade within 3 to 6 months… Any blemishes in your current oil based coating will not be masked by the water based product.

If the brightener dries on your decking, it’ll cause a blotchy appearance. If you notice it starting to dry up, you can wet with a light spray from a garden hose. After 15 minutes, you can use a pressure cleaner to remove all of the brightener from your decking. Make sure to wet your garden and plants down while you’re removing the brightener.

How Deck Staining Murfreesboro can Save You Time, Stress, and Money.

Now allow your deck to completely dry before you apply any protective coatings. 24 hours would be a safe bet. Once the boards are dry, make sure you apply the coating with a Deck, Brush applicator, not a roller or lambswool applicator. And don’t forget to use the brush on, Brush off Technique You should only need one coat of stain for a recoat, or 2 to 3 coats if you had to strip your deck back and start again.

I’ve put together a guide called The 7 Rules of Deck Restoration for Homeowners. It covers the seven main techniques that you need to know before you restore your own deck. They’re really quite simple but if you don’t know them, you could really destroy your deck. If you want a copy, enter your email into the form below and I’ll send you a copy.

What Does Deck Staining Murfreesboro Mean?

Applying more stain won’t hide the damage. Never put a decking stain over paint. The stain needs to be absorbed into the timber boards. If there’s paint on the surface, the stain will sit on the top like a film and eventually peel off I would recommend staining a deck rather than painting a deck.



Paint merely sits on the surface and has a tendency to bubble up and peel off. The only time you can re-stain your deck a different colour is if you strip it back and start again. Don’t try to apply a new colour or different product if your deck is already stained.

The Best Strategy To Use For Deck Staining Murfreesboro

When it comes to staining your deck, always use a paint brush for the edges and a deck brush applicator for the bigger areas of your deck. Never use a roller to stain your deck. A roller applies a heavy coat of stain which is actually not a good thing.


April 19th, 2019 Posted by Jason Rohrbaugh Even the hardiest of deck materials are prone to weather damage over time, which is why savvy homeowners invest in regular Recommended Reading deck staining. Regular staining is the best way to maintain your deck’s appearance. When you have your deck stained, you’ll be highlighting its natural wood grain (Deck Staining Murfreesboro).

Little Known Questions About Deck Staining Murfreesboro.

Staining your deck is the number-one way to keep the wood from rotting due to mold, termites or mildew (Deck Staining Murfreesboro). Once your deck begins to rot, there’s no real way to stop it. Not only is rot unsightly, but it’s also a safety hazard as it could cause your deck to collapse.

You could say that deck staining is essential in maintaining the beauty and functionality of your home’s deck. A beautiful deck offers an inexpensive extension of your living space. However, it also needs some TLC (and sometimes even more) if you want it to look good! In this article, you will learn how to stain like the pros with 4 easy steps.

Deck Staining Murfreesboro for Beginners

Not only does it help remove dirt and mildew, but also helps restore wood back to its natural color. One of the most labor-intensive steps in maintaining a deck is cleaning it. Pressure washing not only gets rid of that nightmare of a mess you know awaits, but also allows for quick and easy removal of stains.

So get some advice on that machine. Are you using the pressure nozzle? Are you using the proper angle? How close to the surface should you be? Are you concentrating the water in a single area for too long? These can all lead to significant damage to the wood fibers and force you into an expensive repair cycle.

Our Deck Staining Murfreesboro Statements

If you’re hoping to avoid painful blisters and scrapes on your feet when walking across the deck, it is important that the wood grain be sanded (Deck Staining Murfreesboro). Especially if the act of cleaning it caused the wood to raise. An electric sander is definitely recommended. Start with a course grit paper for the first pass.

Once you’ve selected a color, it is time to choose the product that best suits your needs. There are many stains available; however, they all have different uses and characteristics. So be sure to do some research before making any decisions about which one will work for what type of situation! A lot of people are happy directory to maintain that natural wood look and will decide on a clear protective sealer.

An Unbiased View of Deck Staining Murfreesboro

Depending on the frequency of use and weather conditions you might have to reapply yearly. A semi-transparent deck stain will give your home’s exterior Your Domain Name a modern, creative touch. You can still see the wood grain and enjoy its beautiful appearance without losing any of that traditional appeal. The clear sealer is a thin layer that just covers the wood.

This coating won’t wear out as often – probably only every 2-3 years or so, depending on how much use it sees. Solid color stains look very similar to flat paints when applied, so the wood grain will be covered. This will give you the best protection for your deck because they provide a long-lasting, durable finish.

Not known Facts About Deck Staining Murfreesboro

Ladies, you wouldn’t apply makeup to your face without first washing your face, right? Guys, you wouldn’t wax your car without washing it first, right? Well, think of wood the same way. You want to remove the dirt, glues, and debris before applying any sort of stain. Properly cleaning wood surfaces will help you avoid sealing dirt into the wood, while also improving the wood’s ability to accept the stain.

This position is not difficult, so invite over a friend, hand them a cold beverage, and attack this process as a team. The big question is whether you’re going to use an oil-based or water-based stain on your deck. For larger surface areas, you may be looking to spray the stain.

The Ultimate Guide To Deck Staining Murfreesboro

If you have less surface area, oil-based stains definitely give you more options and last longer in the occasional harsh Iowa climate. With more transparency and longer lasting protection, if you’re able to use an oil-based stain, we recommend it. If you’re staining a new deck for the first time, an oil-based stain is key to enriching the original color of the wood as well.

Report this wiki page